FAQs & VIDEOS
Review commonly asked questions and assembly/installation videos here...
What are the dimensions of the racks?
TRAPAWAY WALL RACKS: Singles - 10oz 8"L x 8"W x 3"H (L is Depth from Wall)
TRAPSKI SIX PACKS: 13.5 lbs - 28"L x 24"W x 16"H
TRAPSKI QUADS: 10.5 lbs - 28"L x 20"W x 12"H
TRAPSKI DOUBLES: 9.5 lbs - 28"L x 17"W x 9"H
TRAPSKI POWDER QUAD: 13.5 lbs - 28"L x 24"W x 16"H
Snow/Wakeboard Wide Stance Racks same dimensions as above but 30"L (29 inch inside clearance)
Will the racks fit in a ski cargo box?
YES! We have a whole series of racks called the LowPro Series that fit inside ski cargo boxes. There are 4 sizes, 2, 3, 4 and a 5 which can also fit snowboards depending on your clearance inside the box!
Always measure the width of your box to determine which TRAPSKI rack is best for your cargo box.
Do the racks fit under a truck bed cover?
Yes, the racks are designed to fit under a truck bed cover with a height range from 9-16 inches.
Note: Some smaller truck beds may need to be measured to ensure a proper fit when using a Six Pack at 16 inches.
See rack dimensions in FAQs for all rack sizes.
How can I provide product feedback to help TRAPSKI Racks evolve?
Please send us your feedback, ideas and thoughts via the Contact Us link on our home page!
We will thank you for the gift in advance! So, thanks!
How do I pick a rack based on my specific ski and boards?
Well, consider the width and ski type for your specific skis and width between bindings for your snow and wakeboards.
All Mtn Series have 1.25-inch-wide slots and accommodate up to about 100MM ski widths. If you have 1 pair or 2 pairs that are wider, you can put them in the upper slots to fit with your All Mtn skis.
Powder Skis are defined as approx. 100MM+ width skis and are best suited in a Powder series rack.
Race and XC Ski Rack Series have a 1.5-inch slot width made for Thicker skis, but can also fit All Mtn skis as well! It is the most versatile rack based on the fact it can fit standard stance snowboards, XC, Race and All Mountain skis!
Snowboards:
Standard Stance is up to 27 inches from outside to outside at the widest part of the binding.
Wide Stance fit binding widths up to 29 inches apart at the widest portion of the bindings. Typically, very tall riders or riders who choose a large toe angle on their binding set up.
Happy to CHAT your specific needs before buying! Hit us up and we can talk through your equipment and get you into the best rack for you.
